UV curable resins for 3D decoration
Tradename: LUXYDIR
Functional Products
These are UV curable resins for hard coatings that have excellent flexibility (workability and elongation) as well as excellent hardness and chemical resistance.
This material is suitable for applications such as 3D decorative molding.
We also have products that express tack-free even before UV irridiation and can be applied to post-cure applications.
Moreover, it is possible to adjust the hardness and flexibility to meet various needs.
About UV curable resins for 3D decoration
DIC's Advantages
Major Applications
By utilizing its workability and elongation properties even after UV curing, it can be used for 3D molding applications.
• Hardcoat film for 3D decorative molding
• Film for car interior materials
Product Lineup
Pre-cure type
| Product | Non-volatile, % | Viscosity （mPa・s） | Solvent | Resin Type | Elongation (%) | Sunscreen resistance | Abrasion resistance | High elongation | Post-cure |
|---|---|---|---|---|---|---|---|---|---|
| CH-S-1693 | 50 | 300 ~ 900 | PGM/MIBK | Urethane acrylate | >200 | Excellent | |||
| CH-S-1695 | 50 | 200 ~ 600 | PGM/MIBK | Urethane acrylate | 100 | Excellent | Good | ||
| ETS-834 | 45 | 2000 ~ 6000 | MIBK | Polymer acrylate | >200 | Very good | Yes | Yes | |
| CH-S-2109 | 45 | 300 ~ 700 | MIBK | Polymer acrylate | >200 | Very good | Yes | Yes |
Elongation measurement condition Thickness：7 ~ 8μm,Base material：PMMA/PC 250μm,Temperature：130℃ (After UV cure)
*MIBK : Methyl iso-butyl ketone
*PGM : Propylene glycol monomethyl ether
Post-cure type
| Product | Non-volatile, % | Viscosity （mPa・s） | Solvent | Resin Type | Elongation (%) | Sunscreen resistance | Abrasion resistance | Tack free property |
|---|---|---|---|---|---|---|---|---|
| V-6850 | 50 | 14000 ~ 17000 | Ethyl Acetate/Butyl Acetate | Polymer acrylate | <100 | Very good | Very good | |
| ERS-830 | 50 | 500 ~ 1200 | Ethyl Acetate/Butyl Acetate | Polymer acrylate | <100 | Excellent | Good | Very good |
| ETS-834 | 45 | 3000 ~ 6000 | MIBK | Polymer acrylate | >200 | Very good | Excellent | |
| CH-S-2109 | 45 | 300 ~ 700 | MIBK | Polymer acrylate | >200 | Very good | Excellent |
Elongation measurement condition Thickness：7 ~ 8μm,Base material：PMMA/PC 250μm,Temperature：130℃ (After UV cure)
*MIBK : Methyl iso-butyl ketone
Contact Us
-
Contact us via website
-
